<strong id="vemaj"><center id="vemaj"><noframes id="vemaj"></noframes></center></strong>
  • <th id="vemaj"></th>
    張家港永豐機電制造有限公司

    產品分類

    彎管機

    當前位置:首頁 > 產品展示 > 彎管機

    CNC控制液壓彎管機(DW-130CNC)


    DW-130CNC x 2A-1S
    CNC控制液壓彎管機
    CNC HYDRAULIC PIPE BENDING MACHINE
    ■彎管采用伺服驅動,強勁有力;
    ■轉角及送料為伺服電機驅動,迅速、準確;
    ■同時儲存多組加工程序,并可靈活切換,方便了品種繁多的產品加工,大大提高了生產效率;
    ■具有自動檢測錯誤及故障的功能,當出現任何非正常動作或有任何危險存在時機器會立即停機并發出異警,幫助操作者排除故障;
    ■特別適用于空間角度多且精度要求高的管件加工。如:汽車油管、空調管、摩托車自行車等車架的生產制作。 
    ■Bending pipe with hydraulic drive,strong power.
    ■The drive of rotating angle and feeding with servo motor, rapid and accurate.
    ■The same time storaging of multi group processing procedures, and can be flexible to switch, convenient for a wide variety of product processing, greatly improving the production efficiency.
    ■Automatic detecting error and fault function, the machine will immediately stop and send out false alarm when there is any abnormal action or any danger exists,to help the operator troubleshooting.
    ■Especially suitable for high precise and high accuracy pipe processing. Such asautomotive tubing, air conditioning pipe, motorcycle bicycle and other frame production.

    1、電控系統:采用日本知名控制器,例如:三菱會社或安川出品的伺服驅動器、伺服馬達、定位模組、CPU等,性能強,穩定性佳;
    2、三菱超大型CPU可容納多組的檔案編輯。每一檔案可設定20個彎管角度,記憶體可儲放多組檔案;
    3、工業用電腦型內裝WINDOWS作業系統與三菱伺服系統搭配(選用);
    4、具自動偵測錯誤及故障功能,并在熒幕顯示,讓操作者容易排除障礙;
    5、所有加工資料都由觸控熒幕輸入;
    6、每一彎管皆可因不同材質變化設定補償值、速度、脫模間隙;
    7、同一支管子每一彎皆可單獨編寫5個動作順序、10段速度,讓操作者搭配使用,提高工作效率、降低管件干涉點;
    8、觸控熒幕可中英文切換。顯示他國語言亦可依需求訂購;
    9、送料方式可因不同需求選擇直送或夾送;
    10、可將XYZ座標自動轉換成YBC加工值;
    11、資料經編輯完成后,有鑰匙保護,防止資料被任意修改;
    1、The electric control system is the Japanese famous controller.For example servo driver,servo motor,positioning module,CPU and other produced by Mitsubishi clubs or Yaskawa,strong performance and good stability.
    2、Mitsubishi super large CPU can accommodate many groups of file editing.Each file can be set at 20 angles,memory can store many sets of files.
    3、Industrial computer based WINDOWS operating system and MITSUBISHI servo system.
    4、With automatic detection error and fault function,and in the screen display,so that the operator easy to remove obstacles.
    5、All processing information by the touching screen input.
    6、Each bending pipe can set the compensation value, speed, release gap according to different materials.
    7、A pipe per bending all individually prepare five action sequence and 10 speed,allows the operator to match the use,improve work efficiency,reduce the fitting interference points.
    8、Touching screen can be switched in English & Chinese.It can also be ordered in other language according with the requirements.
    9、Feeding mode can be chosen to send or clip with different needs.
    10、XYZ coordinate can be automatically converted into YBC value.
    11、It has the key to protect after the information is edited,prevent data were arbitrarily modified.

    本港台现场直播开奖 通许县| 辽源市| 咸宁市| 岳阳县| 大丰市| 华阴市| 滨州市| 尼玛县| 沁阳市| 英德市| 承德市| 巴彦淖尔市| 盐亭县| 德钦县| 定南县| 永泰县| 平度市| 湟源县| 莱西市| 梁平县| 阿克陶县| 浮山县| 普安县| 莱芜市| 灵山县| 恩平市| 丘北县| 张掖市| 辽源市| 澄江县| 鄂托克前旗| 怀安县| 大新县| 永仁县| 江都市| 闻喜县| 临海市| 海阳市| 西乌| 台北县| 栾川县| http://so.x2541x.top http://china.sinas6u.pw http://china.lsjfem.club http://www.112bio.top http://www.187un.cn http://rdm74a.top